M

Driveway Cost Calculator 2026

Estimate driveway cost by material (concrete, asphalt, gravel, pavers) and size. Includes tear-out of existing driveway and regional pricing.

🟢 Updated April 2026👤 Reviewed by MoneyMath Editorial⚡ Runs in your browser · inputs never leave your device
Estimated driveway cost
$3,300 – $6,100
360 sq ft · $9.10–$16.90/sqft
asphalt (360 sqft)$9.10–$16.90/sqft
Total range$3,300 – $6,100
Show the formula
total = length × width × $/sqft × region + removal

Driveway cost by material (2026)

  • Gravel: $1–$3/sqft · indefinite with refills
  • Asphalt: $7–$13/sqft · 15–30 years
  • Concrete: $6–$15/sqft · 30–50 years
  • Stamped concrete: $12–$25/sqft · 30-50 years
  • Pavers: $15–$30/sqft · 25-50 years
  • Cobblestone: $25–$50/sqft · 100+ years

Typical double-car driveway (540 sqft): gravel $540–$1,620 · asphalt $3,780–$7,020 · concrete $3,240–$8,100.

How to save

  • Consider gravel for rural driveways — 80% cheaper than concrete.
  • Resurface instead of replace — if base is intact, save 30-50%.
  • Schedule spring/early fall — peak summer pricing is highest.
  • Use 10ft width vs 12ft saves 17% on materials.
  • Skip premium finishes — stamped doubles cost for aesthetic only.

Frequently Asked Questions

How much does a driveway cost in 2026?

Driveway installation costs $3,000-$15,000 in 2026 for a typical 600 sq ft driveway. Gravel: $1-$3/sq ft. Asphalt: $7-$13/sq ft. Concrete: $6-$15/sq ft. Pavers: $15-$30/sq ft.

What is the cheapest driveway material?

Gravel is cheapest at $1-$3/sq ft installed ($500-$1,800 for typical driveway). Crushed stone lasts 10+ years with periodic refilling.

How long does a driveway last?

Gravel: indefinite with refills. Asphalt: 15-30 years with sealing. Concrete: 30-50 years. Pavers: 25-50 years. Cobblestone: 100+ years.

Is it cheaper to resurface or replace a driveway?

Resurfacing costs 30-50% less than replacement. Asphalt resurfacing: $1-$3/sq ft. Concrete resurfacing: $3-$7/sq ft. Works if base is intact.

Do I need a permit for a driveway?

Most municipalities require a permit for new driveways connecting to public roads. Cost: $50-$500. Check with your city planning department before ordering materials.